Collision
The Shaked Law Firm knows that there are many causes of trucking accidents:
Blind Spots
Squeeze Play
Braking Ability
Swinging Turns
Bald Tires / Tire Blowout
Overweight / Overloaded Trucks
Falling Debris
We have classified some of these truck accidents into types (collision and non-collision). We hope the knowledge will empower you to avoid these types of trucking accidents, and perhaps even prevent some truck accidents from occurring. Truck drivers and other drivers (including motorcycles and autos) should be aware of these types of truck accidents, take the necessary precautions, and drive accordingly. While we sincerely hope you will never require our services, if you are involved in a trucking accident due to one of the following, contact us. The consultation is free, and we have the knowledge and experience to help.
Truck Blind Spots – No Zone Accident
Trucks have huge blind spots, also referred to as “no zone” areas. Typically, the larger the truck, the larger the blind spot. We all know about blind spots on the sides of our vehicle. The tractor trailer driver has a blind spot in the rear (back) of the truck, as well as in the front of the truck. Be aware of truck blind spots, and avoid these areas if possible. Typically, if you cannot see the truck driver in his mirror, the truck driver probably cannot see you. If you were involved in a blind spot (no zone) trucking accident, contact an experienced Miami blind spot accident lawyer for a free consultation to discuss your case.
Squeeze Play and Wide Turns
“Squeeze play” is a term used to describe a truck accident that occurs when a truck driver needs to make a turn. This is also referred to as a “swinging turn” accident. For example, if a tractor trailer needs to make a right turn, it will swing left to negotiate the turn. This can cause a truck accident in two ways: First, when the truck swings left, it can “squeeze” a car between it and the curb. This occurs because truck drivers are often unable to see cars right next to them. Second, cars attempting to pass on the right, or driving on the right, but in the truck driver’s blind spot, are also susceptible to trucking accidents from the “squeeze play.” If you have been involved in a “squeeze play” accident, you need an injury lawyer knowledgeable in this area.
Truck Braking and Brake-Failure Accidents
Truck accidents from braking (or lack of braking ability) can occur in several ways, including:
- Brake Failure
- Improper Braking Technique
- Stopping Distance
- Brake Failure
Brake failure occurs because of improper installation, age, or maintenance by either the big rig owner (for big rig brakes), or the truck trailer owner (for truck trailer brakes). Also, according to Technical Services (TS), a truck’s brakes can dramatically heat up from overuse, for example riding the brakes on a long downgrade, or from sudden stopping (especially at high speeds). The heavier the truck, generally, the more heat generated. In addition, improper loading can make the brakes heat up more during use.
Improper Braking Technique
According to Technical Services, truckers should apply their brakes in a way that will reduce their speed by about 5-6 mph with each application. A runaway truck is very dangerous. Proper braking technique will help preserve a truck’s brakes. If you have been injured in a runaway truck accident, let us show you how we earned our excellent reputation.
Stopping Distance / Rear-end Collisions
Trucks require a much greater stopping distance to stop than cars. The heavier the truck, the greater the distance needed to stop. When cars or truck drivers fail to realize the distance needed to stop, the risk of a rear-end collision increases. According to the National Safety Council’s Defensive Driving Course for Professional Truck Drivers, the stopping distance for an 80,000 pound tractor trailer, traveling at 30 mph on a dry, level road, is 100 feet. If we double the speed to 60 mph, the stopping distance for that truck doesn’t double, it increases over four-fold to 426 feet. If we increase that speed another 5 mph, to 65 mph, the distance needed to stop increases almost another 100 feet, to 525 feet (compared to 316 feet for a car – more than 200 extra feet). It is no wonder that trucks are involved in many rear-end collisions. Truck drivers and other vehicles need to understand the distance discrepancy between cars and trucks, and drive accordingly.
If you have been involved in a truck rear-end collision, don’t wait to contact a semi accident attorney…we can help.